About you, your 4x4 and access

Engine torque Dampener for Jeep TJ

Avid 4 wheelers will experience the improved throttle response this product provides when crawling up a trail is incredible. Two applications are available at this time for this for Jeep TJ -- P/N 93050 fits the 1999-2006 Jeep Wrangler/TJ 4.0 liter and P/N 93052 for the 1997-2002 Jeep Wrangler/TJ 2.5 liter.

See it at the link below.



  9845 Hits

Jeep XJ - new heavy duty fender flares

V2 Heavy Duty Fender Flares - Jeep Cherokee XJ 97-01, 4 door

Doug Napier said he saw a need for better quality fender flares when the expensive set of aftermarket fender flares on his Jeep Cherokee XJ shattered on their first trail ride. After hearing that this was common, he developed fender flares that would hold up to trail use, look great on the street, and still be affordable.

As a result, the V2 Fender Flares can withstand a "crush test" that involves parking a Jeep Cherokee on a fender flare. They blend much better with the look of the Jeep Cherokee and are still competitively priced.

The V2 Fender Flares are 50% thicker to withstand abuse on the trail or street. They extend out around 3.25" which is the perfect width to cover most popular oversize tires. This maintains an aggressive stance without sticking out too far. Also, these fender flares are the popular "cut-out style" that maximizes the wheel well opening allowing for larger tires and more articulation.

Continue reading
  11395 Hits

Rough Country’s New Jeep Lift Kit Won’t Leave You Hanging

The 1 ¼” lift kit has been a popular product for Rough Country as is, boasting a quarter-inch larger boost than most other manufacturers. The uniquely designed spacers nest with the factory body mounts keeping the body properly aligned with the frame. This design provides lift, while retaining the noise and vibration canceling characteristics of the factory mounts.

Even with the addition of the new rear bumper brackets, this kit is one of the easiest to install, at an estimated one to three hours. The kit includes the new rear bumper brackets, ten to twelve spacers depending on the amount of doors on the vehicle, and all required nuts and bolts. A comprehensive set of instructions are included as well, to ensure a successful install.  The 1 ¼” Jeep TJ Body Lift Kit is a steal, starting at $99.95 for two door models and $109.95 for 4 door models. The rear bumper brackets can also be purchased separately for $24.95, and work with most 1” lifts regardless of manufacturer. Operators are standing by to assist with installation questions and order inquiries at 1-800-222-7023. Customers may also view products, chat with an agent, and order online at www.roughcountry.com.

Formed in early 1970’s, Rough Country Suspension® Products was a founder of the off-road industry and is one of the fastest growing manufacturers and marketers of lifted suspension packages and off-road accessories for 2wd and 4wd trucks and SUVs. Rough Country Suspension® Products is owned by Heckethorn Products® which boasts a rich history in the automotive aftermarket, including the invention of the first steering stabilizer for military Jeeps in the 1950s. As a complete supplier, Rough Country Suspension Products offers retailers, wholesalers, and consumers an opportunity to purchase easy to install off-road products the market is demanding.

  9651 Hits

Looks Great – Built Tough

MBRP   Front Light Bar / Grille Guard


The light bar comes with two mounting tabs and holds up to 8" diameter lights. This is a quick "no drill" install that takes thirty minutes using common hand tools and some simple trimming of plastic. The whole job can be done with a bit of trimming of plastic components and without removing the bumper. The unit is even pre-drilled to allow for internal wiring of lights. Lights not included.

Find out more about Off Camber Fabrications by MBRP Inc. at www.mbrp.com or call toll free at 888-636-7223.

MBRP Inc.’s off road accessories division, OFF CAMBER FABRICATIONS stands as the brand that Jeep enthusiasts rely on for superior quality and innovative design. Whether it’s a modular cargo carrier or flashlight mount, all Off Camber Fabrications products are designed and built for Jeep enthusiasts by Jeep enthusiasts. Rigorously tested in the toughest environments, from the Moab back country to the bush of northern Canada, each product must earn the Off Camber Fabrications brand.

  9884 Hits

Rack up Your Gear with Off Camber Fabrications

Huntsville, ON (Nov 27, 2009) : Off Camber Fabrications by MBRP has the stowage solution for all the gear you’ll need for your next off road adventure. With our new Modular Roof Rack kits for the two or four door Jeep JK you can pile on the heaviest load without any difficulty. That’s because our rack’s heavy walled 2” mandrel bent tubing distributes the cargo weight to the vehicle body. Add a cargo basket or extension kit and there will be nothing that you can’t load on.

The rack is a simple bolt on install, drilling of the hard top is required. Each kit comes complete with all necessary hardware as well as precision cut gaskets that go between the roof and the rack mounts to ensure a leak free seal once the rack is installed. The rack design features an adjustable cross bar system that will virtually allow 100's of different including most Thule and Yakima racks. Carrying bikes, canoes, a kayak or skis and snowboards will be a pleasure.

The strength of this patented roof rack comes from a robust infrastructure we mount on the inside of the Jeep. With this bolted into place all weight from the cargo is distributed down to the tub or body of the Jeep. The roof rack makes it very simple to remove or install the hard top by providing solid lift points for manual use or with a lift system. The rack and hard top can be stored without ever having to take them apart.

Each rack system ships common carrier and is not "truck freight" so shipping is not an issue.

Find out more about Off Camber Fabrications by MBRP Inc. at www.mbrp.com or call toll free at 888-636-7223.


  10016 Hits

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting. Copyright (c) 1999-2020 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission. You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material. All corporate trademarks are the property of their respective owners.