By accepting you will be accessing a service provided by a third-party external to http://www.4x4wire.com/
The flags are typically a 5 foot fiberglass pole with a red flag attached to the top and either 1/4” or 5/16” diameter. While there are a number of different methods to mount the flag on an ATV, dune buggy, or side-by-side, mounting on a full-size 4x4 requires a little planning.
My recent visit to the Sand Sports Super Show provided an interesting, easy to mount quick-release system designed to simplify the process for mounting and dismounting whips with no tools and no trimming of shattered ends necessary.
Wash-15 Offroad has developed an anodized billet aluminum whip mount that will accommodate either 1/4” or 5/16” diameter whips. The whip is held in place in a groove with a mounting pressure plate secured with a wing nut. The recessed area easily accommodates shattered ends or frayed ends without cutting whips shorter. The mount has a bolt that fits standard 1/2 “ accessory mounts.
Well, my jeep doesn't have a 1/2“ accessory mount. So, not willing to let a fabrication opportunity go to waste, I dug through my scrape metal pile and found a short section of 1 1/2 “ angle iron. The chop saw quickly reduced it to a 2 inch section. Not liking pointed edges, I did radius the corners and provided a quick rattle can pint job. My fabricated mount is in the left of the picture.
While waiting for the paint to dry, I considered some mounting options. Yeah, I could have welded a tab on my tire rack. I opted to use the already semi accessory mounting spot where my CB antenna was mounted. As the surface I chose to use with an existing bolt hole was slanted, I did a have to bend the angle iron. Good thing I have a large vice….
While overkill, I did tap the mounting hole to accommodate the the 1/2 “ - 28 thread mounting stud. In addition to the ny-lock nut provided with the mount, it wont be vibrating loose.
The final mounting provides for a whip that is secure and does not interfere with the opening of the tire mount. Ready for the dunes….
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting. Copyright (c) 1999-2020 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission. You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material. All corporate trademarks are the property of their respective owners.